Windows 문제 수정

Windows에서 CHKDSK가 멈췄나요? 모든 시나리오에 대한 전체 수정 가이드

2025년 12월 21일 아직 댓글이 없습니다
Windows에서 CHKDSK가 멈춤

When CHKDSK Gets Stuck, Everything Stops

실행 중 CHKDSK is usually a routine maintenance task. However, when CHKDSK stuck issues occur, users often feel helpless. The scan appears frozen for hours, disk activity stops, and Windows becomes unresponsive. At this point, many users face a difficult question: Should I wait, stop CHKDSK, or restart the system?

Unfortunately, an incorrect decision can lead to 파일 시스템 손상 또는 영구적인 데이터 손실.

이 가이드는 다음과 같이 설명합니다. why CHKDSK gets stuck, how long you should wait, and which fixes work in real-world scenarios. More importantly, it also addresses data loss risks and explains when using Magic Data Recovery becomes the safest option.

Magic Data Recovery 다운로드

Windows 7/8/10/11 및 Windows Server 지원

목차

What Does “CHKDSK Stuck” Mean?

When users say CHKDSK stuck, they usually mean:

  • The progress percentage does not change for a long time
  • CHKDSK freezes at a specific stage (often stage 4 or 5)
  • Disk usage drops to 0% in Task Manager
  • The system becomes slow or completely unresponsive

In most cases, CHKDSK is not truly frozen. Instead, it is processing complex disk structures that take much longer than expected.

How Long Is Too Long for CHKDSK?

Before assuming CHKDSK stuck, consider these time ranges:

  • Small SSD (≤256GB): 10–40 minutes
  • Large HDD (1–4TB): 2–6 hours
  • Drives with bad sectors: 8+ hours is possible

If CHKDSK shows no progress for more than 3–4 hours, especially with no disk activity, intervention becomes reasonable.

Common Scenarios Where CHKDSK Gets Stuck

CHKDSK Stuck at Stage 1: File Verification

This stage checks file records.

Stalls here often indicate:

  • 손상된 NTFS metadata
  • Interrupted previous disk operations
  • Sudden power failure

Although delays are normal, extreme pauses suggest deeper file system issues.

CHKDSK Stuck at Stage 2 or 3: Index and Security Descriptors

언제 CHKDSK stuck occurs during index verification:

  • The disk may contain orphaned files
  • Folder structures may be severely damaged
  • Antivirus software may interfere

This stage tends to slow down significantly on older HDD.

CHKDSK Stuck at Stage 4 or 5: Bad Sector Scan

This is the most common and alarming scenario.

Stage 4 and 5 perform surface scans, checking every sector on the disk. On failing drives, CHKDSK retries bad sectors repeatedly, which explains why progress seems frozen.

At this point, forcing a shutdown can be risky.

Why CHKDSK Gets Stuck: Root Causes Explained

Understanding the root cause helps you choose the right fix.

1. Physical Disk Damage

Bad sectors and failing read/write heads slow CHKDSK dramatically.

2. Large Disk Size

The larger the disk, the longer each stage requires.

3. 파일 시스템 손상

Severe corruption forces CHKDSK to rebuild metadata structures.

4. Hardware Conflicts

Loose cables, outdated drivers, or controller issues affect stability.

5. Insufficient System Resources

Low memory or background tasks can slow the scan significantly.

Is It Safe to Stop CHKDSK When It Is Stuck?

This depends on what CHKDSK is doing.

  • If CHKDSK runs in 읽기 전용 모드, stopping is usually safe
  • If CHKDSK is repairing the file system, interruption can worsen corruption

When data matters, stopping CHKDSK without preparation increases risk.

모범 사례: secure your data first, then attempt repairs.

What to Do Before Fixing a CHKDSK Stuck Issue

Before applying any fix:

  1. Wait at least 2–3 hours
  2. Check disk activity via Task Manager
  3. Listen for abnormal disk noises
  4. Avoid repeated forced restarts

If important files exist on the drive, 데이터 복구 should come first.

Recover Data Before Attempting Risky Fixes

언제 CHKDSK stuck happens due to disk errors, continued repairs may overwrite recoverable data. This is where a dedicated recovery tool 가 필수 요소가 됩니다.

Magic Data Recovery를 권장하는 이유

Magic Data Recovery is designed for situations where disk repair tools fail or become unsafe.

Key Pain Points It Solves

  • Recovers files from corrupted file systems
  • Works when CHKDSK cannot complete
  • 지원 RAW, NTFS, FAT32, 및 exFAT 드라이브

고유한 이점

  • 읽기 전용 스캔으로 추가 손상 방지
  • Advanced deep scan for lost partitions
  • 복구 전 파일 미리보기
  • User-friendly interface for non-technical users

Typical Use Scenarios

  • CHKDSK stuck at stage 4 for hours
  • Disk becomes RAW after interruption
  • Files disappear after forced restart

Compared to manual fixes, Magic Data Recovery 에 중점을 둡니다. 데이터 안전 최우선, which makes it more reliable in high-risk scenarios.

Magic Data Recovery 다운로드

Windows 7/8/10/11 및 Windows Server 지원

If you are dealing with critical files, trying Magic Data Recovery before further disk repairs is a safer approach.

Proven Fixes for CHKDSK Stuck on Windows

After securing your data, apply the following fixes.

Fix 1: Restart CHKDSK in Safe Mode

Safe Mode reduces system interference.

단계:

  1. Restart Windows
  2. Enter Safe Mode
  3. 관리자 권한으로 명령 프롬프트 열기
  4. 실행:

chkdsk C: /f

This often resolves CHKDSK stuck issues caused by software conflicts.

Fix 2: Run CHKDSK Without Surface Scan

If stage 4 or 5 causes delays, avoid /r.

chkdsk C: /f

This skips bad sector scanning and completes faster.

Fix 3: Check Disk SMART Status

Use manufacturer tools or SMART utilities to verify disk health.

A failing disk should not undergo repeated CHKDSK repairs.

Fix 4: Run SFC and DISM

System file corruption can interfere with disk checks.

sfc /스캔나우

DISM /온라인 /정리-이미지 /건강 복원

Run these 전에 retrying CHKDSK.

Fix 5: Replace the Drive if Errors Persist

만약 CHKDSK stuck continues after multiple attempts, the disk may be physically failing. Continued use increases data loss risk.

피해야 할 일반적인 실수

  • Repeated forced shutdowns
  • Running CHKDSK multiple times on a failing disk
  • Ignoring early signs of hardware failure
  • Attempting repairs before 데이터 복구

These mistakes often turn recoverable data into permanent loss.

결론

A CHKDSK stuck issue does not always indicate failure, but it does signal potential risk. While waiting can help in mild cases, persistent freezes often point to deeper disk problems.

The safest strategy follows this order:

  1. Assess disk activity
  2. Recover important data first
  3. Apply targeted fixes
  4. Replace failing hardware when necessary

Magic Data Recovery stands out because it prioritizes data safety over risky repairs. For users who value their files, it provides a practical and reliable solution when CHKDSK cannot finish its job.

If you are looking for a safer way to handle a stuck disk check, Magic Data Recovery 를 고려할 가치가 있습니다.

Magic Data Recovery 다운로드

Windows 7/8/10/11 및 Windows Server 지원

자주 묻는 질문

1. Is it safe to stop CHKDSK at stage 4?

Stopping CHKDSK at stage 4 is not recommended unless absolutely necessary. Stage 4 scans the disk surface for bad sectors and attempts recovery. Interrupting this process may worsen file system corruption or lead to data loss, especially on damaged HDDs. If important files exist, data recovery should be performed before stopping CHKDSK.

2. Why is my CHKDSK taking so long?

CHKDSK may take a long time due to disk size, the presence of bad sectors, severe file system corruption, or hardware degradation. Stage 4 and stage 5 are particularly slow because they perform sector-by-sector scans. Older HDDs and failing drives are common causes of extended scan times.

3. How long does CHKDSK stage 4 take?

CHKDSK stage 4 can take several hours on large or damaged drives. On healthy SSDs, it may complete within minutes, while on multi-terabyte HDDs with bad sectors, it can run for 6–8 hours or longer. Lack of progress for several hours may indicate disk issues.

4. Is CHKDSK /f or /r better?

Neither option is universally better; they serve different purposes. CHKDSK /f fixes logical file system errors and runs faster. CHKDSK /r includes a surface scan to locate bad sectors, which significantly increases scan time and disk stress. On suspected failing drives, /f is often safer.

5. Can you cancel CHKDSK while it's running?

You can cancel CHKDSK, but doing so while it is repairing the file system is risky. If CHKDSK is running in read-only mode, cancellation is generally safe. However, if repairs are in progress, stopping the process may cause further corruption or make data recovery more difficult.

6. What if CHKDSK freezes?

If CHKDSK appears frozen, first check disk activity and allow sufficient time, especially during stage 4. If there is no progress for several hours and disk activity is zero, the drive may be encountering bad sectors or hardware failure. In such cases, recovering data before further repair attempts is strongly advised.

7. Can CHKDSK take days?

Yes, CHKDSK can take days in extreme cases. Very large drives, extensive bad sectors, or repeated read retries can cause CHKDSK to run for an unusually long time. When CHKDSK exceeds 24 hours with minimal progress, it often indicates serious disk problems rather than normal behavior.

에린 스미스는 Amagicsoft에서 가장 전문적인 작가 중 한 명으로 인정받고 있습니다. 지난 10년간 꾸준히 글쓰기 기술을 연마해 왔으며 수백만 명의 독자가 기술 문제를 해결하는 데 도움을 주었습니다.

관련 게시물

chkdsk r 명령
디스크 문제 수정

CHKDSK /R: 하드 드라이브 오류 수정에 대한 궁극적인 가이드

2025년 12월 20일 The Ultimate Guide to CHKDSK /R: Fix Hard Drive Errors에 댓글 닫힘

컴퓨터가 설명할 수 없을 정도로 느리게 실행되거나, 시스템에서 이상한 딸깍 소리가 나거나, 끔찍한 “죽음의 블루 스크린”이 나타나기도 합니다. 이러한 증상은 종종 더 심각한 문제인 디스크 오류를 가리킵니다. 수십 년 동안 Windows에는 이러한 문제를 해결할 수 있는 강력한 기본 제공 유틸리티가 포함되어 있습니다. chkdsk r 명령은 중요한 응급 처치 도구입니다 [...].