磁碟問題修正

發生磁碟讀取錯誤：原因、修復方法和資料復原提示

2025 年 12 月 19 日 尚未有評論
為何發生磁碟讀取錯誤

Encountering the error message “A disk read error occurred” when your computer boots can be alarming. This message usually appears on a black screen and prevents Windows from starting normally—leaving many users confused about the next step. Simply pressing Ctrl+Alt+Del typically just restarts the machine but does not resolve the underlying problem.

In this article, we analyze why a disk read error occurred happens, present accurate and technical solutions you can try step by step, and explain how to safely 復原您的資料 if files become inaccessible—using a reliable tool like Magic Data Recovery.

下載 Magic Data Recovery

支援 Windows 7/8/10/11 和 Windows Server

目錄

What Does A Disk Read Error Occurred Mean?

Unlike ordinary system errors that occur after Windows has loaded, the a disk read error occurred message appears 之前 the operating system starts. In technical terms, this indicates that the system BIOS or UEFI attempted to read the boot disk, but failed to retrieve necessary data structures such as:

  • 主開機記錄 (MBR)
  • Boot Configuration Data (BCD)
  • Partition table
  • Essential boot sectors

This failure interrupts the boot process and halts the system.

Primary Causes of A Disk Read Error Occurred

Understanding the core causes will help you choose the right troubleshooting steps.

1. Corrupted Master Boot Record (MBR) or BCD

的 主開機記錄 and BCD store essential instructions for starting Windows. If they become corrupted—often due to power loss, improper shutdown, or partition errors—your PC cannot locate the correct start point.

2. Misconfigured Partition Table

A corrupted or incorrectly configured partition table can leave the system unable to find the active operating system partition. This is a frequent cause of read errors post-disk write interruption.

3. Incorrect Boot Order or Missing Drive Detection

When BIOS/UEFI attempts to boot from the wrong device (e.g., USB or external drive), the system fails and reports a disk read error occurred. Also, if the hard drive is not detected in BIOS, it strongly suggests connection or hardware issues.

4. Loose or Faulty Internal Cables

A loose SATA, NVMe, or power cable can interrupt drive communication with the motherboard. Even if the drive itself is intact, poor connection leads to read failures.

5. Bad Sectors or Failing Hard Drive

Physical wear on hard drives or 固態硬碟機 issues can create unreadable sectors. Over time, sectors containing critical system data may fail, leading to this error.

6. Faulty RAM or BIOS/UEFI Problems

In uncommon cases, defective RAM modules or outdated BIOS firmware can introduce instability that leads the system to misread the disk.

Step-by-Step Solutions to Fix A Disk Read Error Occurred

Fix A Disk Read Error Occurred

Here are reliable methods ordered from safe and easy to more advanced:

1. Preliminary: Power Cycle and Remove External Devices

Before starting complex fixes:

  • Turn off the computer completely.
  • Unplug all USB drives and external storage.
  • Wait 10–15 seconds and then restart.

This ensures the boot sequence is not interrupted by external devices or transient glitches.

2. Confirm Hard Drive Detection in BIOS/UEFI

Ensuring your drive is recognized is essential:

  1. Restart your PC and enter BIOS/UEFI (usually pressing Del, F2, F10, or Esc).
  2. 導覽到 儲存 或 Boot section.
  3. Verify that your primary boot drive is listed and set as the first boot device.

If the drive does not appear, it may be disconnected, improperly seated, or defective.

3. Rebuild MBR and Fix Boot Configuration

If the boot structures are corrupted:

  1. Boot from Windows installation USB or DVD.
  2. 選擇 維修您的電腦 > 疑難排解 > Advanced Options > 指令提示.
  3. In the command prompt, run:

bootrec /fixmbr

bootrec /fixboot

bootrec /scanos

bootrec /rebuildbcd

  1. Restart after completion.

This sequence repairs the MBR and rebuilds boot configuration data.

4. Use CHKDSK to Repair File System Errors

Corrupted file systems can also cause read issues:

  1. Boot to Windows Recovery Environment as above.
  2. 運行：

chkdsk C：/f /r

更換 C: with your system drive letter if needed.

This utility scans for and attempts to repair bad sectors or targeted errors.

5. Reseat Cables and Check Hardware

For desktops:

  • Power off and unplug.
  • Check SATA/data and power cables for firmness or visible damage.
  • Try different cable ports.

For laptops:

  • If comfortable, reseat the drive or seek professional support.

This eliminates many connection faults.

6. Reset or Update BIOS

Sometimes BIOS settings block correct booting:

  1. Enter BIOS/UEFI.
  2. Load Default Settings or optimized defaults.
  3. Save and reboot.

If the error persists, consider updating to the latest BIOS version per manufacturer instructions.

What to Do If Files Are Inaccessible or Lost

Even once the system boots, you may notice missing files or folders. This happens because repairs like CHKDSK can restructure file systems, making some data inaccessible. In such cases, 資料復原軟體 becomes critical.

Recover Data with Magic Data Recovery

Why Use Magic Data Recovery?

Magic Data Recovery is designed specifically to handle:

  • Corrupted drives where Windows won’t start
  • Drives with 壞扇區
  • Inaccessible or lost files after system repairs

Unlike manual command-line recovery or system restore, it focuses on data safety first.

Key Benefits

  • Thorough deep scan detects recoverable files even in damaged file systems
  • Works on 硬碟機, 固態硬碟機, USB, and external storage
  • Supports recovery of photos, documents, videos, and system files
  • Read-only operations prevent overwriting existing data

Typical Recovery Scenario

Imagine you fix a disk read error occurred 與 CHKDSK—but important work documents are missing afterward. By connecting the affected drive to a working PC and running Magic Data Recovery, you can scan for recoverable files and restore them to a safe location 之前 performing any risky operation like reformatting or reinstalling Windows.

If you are seeking a safer and more efficient way to retrieve lost files, consider trying Magic Data Recovery before irreversible steps.

Preventing A Disk Read Error Occurred in the Future

  • Regularly back up important data
  • Monitor drive health via SMART tools
  • Use a UPS to prevent sudden shutdowns
  • Replace aging drives preemptively
  • Maintain clean cable connections and BIOS updates

總結

的 a disk read error occurred message is a common but often fixable boot issue that can stem from corrupted boot data, cable problems, partition errors, or hardware faults. Systematic troubleshooting—from BIOS checks to repairing boot structures—can resolve most cases without hardware replacement.

However, protecting your data remains the priority. When critical files become inaccessible, using a reliable recovery tool like Magic Data Recovery gives you the best chance to retrieve information safely before performing more invasive fixes.

下載 Magic Data Recovery

支援 Windows 7/8/10/11 和 Windows Server

常見問題

1. How do I fix a disk read error occurred?

To fix a disk read error occurred, start by removing external devices and restarting the computer. Then check whether the system drive is detected in BIOS and set as the first boot device. If the issue persists, repair the boot records using Windows recovery tools, run CHKDSK to fix file system errors, and reseat disk cables if necessary. When data becomes inaccessible, recover files first before attempting advanced repairs.

2. How to fix CHKDSK errors in Windows 10?

To fix CHKDSK errors in Windows 10, open Command Prompt from Windows Recovery Environment and run chkdsk /f or chkdsk /r on the affected drive. Make sure the drive is not in use and allow CHKDSK to complete without interruption. If errors keep reappearing, the disk may have underlying hardware issues.

3. Are disk read errors common on SSDs?

Disk read errors are less common on SSDs than on traditional hard drives, but they can still occur. SSD-related read errors are often caused by firmware issues, file system corruption, or controller problems rather than physical bad sectors. BIOS misconfiguration and sudden power loss can also trigger disk read errors on SSDs.

4. How to fix Ctrl Alt Delete error?

When the screen displays “A disk read error occurred. Press Ctrl+Alt+Del to restart”, pressing the key combination only restarts the system and does not fix the root cause. To resolve the error, you must repair boot records, correct BIOS boot order, or fix disk-related issues using recovery tools instead of repeatedly restarting.

5. How to CHKDSK and repair?

To run CHKDSK and repair disk errors, boot into Windows Recovery Environment, open Command Prompt, and type chkdsk C: /f to fix logical errors. If disk sectors may be damaged, use chkdsk C: /r to locate bad sectors and recover readable data. Replace the drive letter if needed.

6. How to press Ctrl+Alt+Del to restart?

To restart using Ctrl+Alt+Del, press all three keys at the same time on the keyboard. If the system responds, it will reboot automatically. However, if a disk read error occurred appears again after restarting, further troubleshooting is required since this action does not resolve disk or boot problems.

7. Is CHKDSK /f or /r better?

CHKDSK /f is better for fixing logical file system errors quickly, while CHKDSK /r is more thorough because it scans for bad sectors and attempts data recovery. If disk read errors are suspected, /r is more effective, but it takes significantly longer to complete.

8. How to fix a corrupt disk?

To fix a corrupt disk, first check disk connections and BIOS detection. Then run CHKDSK to repair file system errors and isolate bad sectors. If the disk still behaves abnormally, back up or recover data using reliable recovery software before formatting or replacing the drive.

Erin Smith 是 Amagicsoft 公認最專業的作家之一。過去 10 年來，她不斷磨練自己的寫作技巧，幫助數百萬讀者解決技術問題。.

相關文章