フォーマットされたUSBドライブのデータを無料で復元:4つの方法

誤ってUSBドライブをフォーマットしてしまい、ファイルエクスプローラーで開いてみると、写真や文書、動画がなくなっていることに気づきました。もしあなたが フォーマットされたUSBドライブのデータを無料で復元する, 、それらのファイルが永久に失われたとは決めつけないでください。.
元のデータが読み取れる状態であれば、クイックフォーマットの後でも復元できることはよくあります。しかし、フルフォーマットが行われた場合や、ドライブに新しいファイルが書き込まれた場合、あるいはハードウェアの問題がある場合は、復元の可能性が大幅に低下します。最も重要な要素は、フォーマット後にデータがどうなったかということです。.
直ちにUSBの使用を中止してください。. このガイドでは、4つの復旧方法について順を追って解説し、適切な方法の選択を支援するとともに、結果の確認方法についても説明します。その他のフォーマット済みのストレージデバイスについては、当社の フォーマット済みドライブの復旧ガイド.
目次
USBドライブをフォーマットした直後にすべきこと
挑戦する前に フォーマットされたUSBデータの復元, 、残りのデータがこれ以上変更されないように保護します。.
- USBには何も保存しないでください。. 新しいファイルが元のコンテンツを上書きする可能性があります。.
- もう一度書式設定しないでください。. 別の形式で、追加のファイルシステム情報を置き換えることができます。.
- CHKDSK やディスク修復ツールは使用しないでください。. 修復作業により、復旧に必要なレコードが変更される可能性があります。.
- リカバリソフトウェアを別の場所にインストールしてください。. お使いのコンピュータの内蔵ドライブを使用してください。.
- 別の目的地を設定してください。. 復元したファイルは、決して問題のあったUSBメモリに保存しないでください。.
- ハードウェアの問題に注意してください。. デバイスが過熱したり、繰り返し接続が切断されたり、容量が正しく表示されない場合は、使用を中止してください。.
Windows で USB を開く前にフォーマットするよう求められた場合は、[ キャンセル. そのメッセージは、ドライブを再度フォーマットする必要があるというよりも、ファイルシステムの破損を示している可能性があります。.
これらの予防措置は、すでに生じてしまった損傷を元に戻すことはできませんが、残された回復の選択肢を維持するのに役立ちます。.
フォーマットされたUSBドライブからファイルを復元することはできますか?
ええ、たまにはね。. 結果は、主にフォーマット方法、その後のデータ書き込み、およびデバイスの状態によって左右されます。.
復旧方法を選択する前に、以下の表を参照してご自身の状況を確認してください。.
USBの状況 | 回復の見通し | 次に何をすべきか |
クイックフォーマット、新しいファイルは作成しない | より好ましい | バックアップを確認してから、スキャンを行ってください |
クイックフォーマット後の再利用 | 一部のファイルは残っている可能性があります | 書き終えたら、スキャンしてください |
Windowsの完全フォーマットを完了しました | 非常に限られている | バックアップを優先する |
USBをWindowsのインストールメディアに変換 | 手つかずの地域は生き残る可能性がある | インストールメディアの使用を中止してください |
USBが「RAW」と表示されるか、フォーマットを要求する | ファイルシステムの損傷状況による | 修理する前に復旧させる |
USBが切断される、または容量が0と表示される | ハードウェアの故障の可能性がある | DIYによる復旧は中止してください |
について フォーマット後のペンドライブ・データ復元, 、一般的に、再利用されていない正常なUSBメモリは、新しいデータが書き込まれたものよりも見通しが良い。.
スキャンする前に、WindowsでUSBを確認してください
まず、開いてください ファイルエクスプローラー > このPC そして、ラベルと容量からUSBを特定します。.
ドライブが開いたものの、中身がないように見える場合は、以下を選択してください。 表示 > 表示 > 非表示項目 Windows 11では、この操作により、隠し属性が設定されている既存のファイルを表示することができますが、実際にフォーマットされた状態を元に戻すことはできません。.
次に、[ ] を押してください。 Win + X そして開く ディスク管理.
ドライブに表示されているステータスを確認してください:
- FAT32、exFAT、またはNTFS: Windows は現在のファイルシステムを認識します。.
- RAW: Windows では、このファイルシステムを正常に処理できません。.
- 未割り当て: パーティション情報が欠落している可能性があります。.
- メディアがない、または容量が正しくない: ストレージデバイスにハードウェア上の問題がある可能性があります。.

RAWボリュームになったからといって、データが自動的に失われるわけではありません。Windowsが依然として正しい容量を認識している場合は、データ復旧ソフトを使ってデバイスのデータを読み取れる可能性があります。詳細については、当社の RAW形式のUSBメモリ復旧ガイド.
USBに物理的な不具合がある場合は、ソフトウェアによる対処は避け、専門家に相談することを検討してください。.
「クイックフォーマット」と「フルフォーマット」で結果が異なる理由
FAT32、exFAT、NTFSなどのファイルシステムは、ファイル名、ディレクトリ、および保存場所を管理します。.
A クイックフォーマット 以前のデータセクタをすべて意図的に上書きすることなく、新しいファイルシステム構造を作成します。その結果、復旧ツールが古いファイルレコードを検出したり、ファイルの内容を認識したりする可能性があります。.
A フルフォーマット 最新のWindowsでは、通常、アクセス可能なセクタの上書きが行われます。一度データが上書きされてしまうと、一般的なソフトウェアではそれを復元することはできません。マイクロソフトは、これらの動作について自社の format コマンドのリファレンス.
フラッシュメモリの場合、USBコントローラが内部で基盤となるストレージを管理しているため、不確実性が生じます。そのため、クイックフォーマットを行った後でも、データが完全に消去されていない可能性は排除できません。.
これはつまり、次のような意味です: USBの使用を中止し、修復を試みる前にファイルを復元し、復元したファイルが実際に開くかどうかで修復の成否を判断してください。.
フォーマットされたUSBドライブを無料で復元する方法:4つの方法
手当たり次第にすべてのツールを試すのではなく、データの損失状況に応じて適切な方法を選んでください。.
バックアップを最優先すべきです。そうすれば、問題のあるUSBをスキャンする必要がなくなります。コピーが存在しない場合、Windowsのファイル復元機能が無料の公式オプションとして利用できます。PhotoRecは、ディレクトリ情報が欠落している場合でも、ファイルのシグネチャを検索することができます。グラフィカルな復元プログラムは、プレビューや選択的な復元を必要とするユーザー向けに、別のワークフローを提供します。.
方法 1:バックアップからフォーマットされた USB ドライブのファイルを復元する
最高だ: すでにそのファイルの別のコピーを所持している可能性があるユーザー。.
バックアップは、フォーマットされたUSBメモリを読み込む必要がないため、データを復元する上でリスクが最も低い方法です。.
過去のコピーを検索する手順
- OneDrive、Google Drive、またはDropboxで、見つからないファイル名を検索してください。.
- クラウド上のゴミ箱フォルダとバージョン履歴を確認してください。.
- お使いのパソコンで元のファイルを探してください。.
- 該当するフォルダに対して以前に「Windows ファイル履歴」を有効にしていた場合は、それを確認してください。.
- その他の記憶媒体、電子メールの添付ファイル、および元のカメラやレコーダーを調べてください。.
たとえば、プロジェクトのドキュメントが入ったUSBメモリをフォーマットした場合でも、それらのファイルはノートパソコン上の元のプロジェクトフォルダにまだ残っている可能性があります。.
期待される結果: 内容、ファイル名、フォルダ構成がすべて元のままの、使える状態のコピーが見つかります。.
制限: Windowsの「ファイル履歴」では、すべてのリムーバブルUSBドライブが自動的にバックアップされるわけではありません。フォーマットを行う前に、別のコピーが存在していた必要があります。.
失敗した場合は: USBの設定はそのままにして、「Windows ファイル復元」に進んでください。.
方法 2:Windows ファイル復元機能を使って、フォーマットされた USB ドライブのデータを無料で復元する
最高だ: Microsoftの無料リカバリユーティリティを利用したい、かつコマンド入力に慣れているWindows 10および11のユーザー。.
Windowsファイル復元 有料の復元ライセンスを必要とせずに、ストレージ内から失われたファイルを検索します。.
マイクロソフトの推奨 詳細モード NTFS形式でフォーマットされたドライブ、およびFATおよびexFATファイルシステムからの復元に対応しています。.
手順 1:ソースと宛先の準備
フォーマット済みのUSBメモリをWindowsパソコンに接続してください。.
ファイル エクスプローラーまたはディスクの管理で、ドライブ文字を確認してください。.
この例では:
- フォーマット済みのUSBメモリ:
E: - 復元先:
D:
復元したファイルには、別の物理ドライブを使用してください。.
ステップ 2: Windows ファイル復元をインストールする
Microsoft Storeから「Windows File Recovery」をダウンロードしてください。.
フォーマット済みのUSBメモリではなく、お使いのコンピュータにインストールしてください。その後、管理者権限でユーティリティを起動してください。.
手順 3:リカバリコマンドを実行する
Word文書、PDFファイル、JPG形式の写真を検索するには、次のように入力してください:
winfr E: D: /extensive /n *.docx /n *.pdf /n *.jpg
ドライブ文字を実際の保存先に置き換えてください。.
このコマンドでは、以下を使用します:
/広範囲なより徹底的な検索を行うために。./n *.docxWord文書をフィルタリングするには。./n *.pdfPDFファイルをフィルタリングするため。./n *.jpgJPG画像をフィルタリングするため。.
You can add more filters, such as *.xlsx, *.png, あるいは *.mp4, depending on the missing files.

Step 4: Check the Recovered Files
Confirm the operation when prompted.
Windows File Recovery creates a folder named 復旧_ on the destination drive.
Open the folder and try opening several recovered files.
期待される結果: The destination contains readable documents, images, or other recovered content.
制限: Windows File Recovery doesn’t provide a graphical file-preview interface, and results may lack original names or complete content.
失敗した場合は: PhotoRec offers an alternative scanning approach, particularly when the file-system records are missing.
Method 3: Recover Formatted Pen Drive Files with PhotoRec
最高だ: Users who need free file-signature recovery and can organize files manually afterward.
フォトレック is an open-source recovery tool available for Windows, macOS, and Linux.
Rather than depending entirely on file-system records, it identifies recognizable file content. This can help recover formatted pen drive files when the original directory structure is damaged or missing.
How to Recover Formatted Data from Pen Drive Using PhotoRec
- CGSecurityの公式サイトからTestDiskとPhotoRecをダウンロードしてください。.
- Extract the archive to your computer.
- Open PhotoRec with administrator permissions, or launch QPhotoRec for a graphical interface.
- Select the formatted USB using its device name and capacity.
- Choose the relevant partition or disk area.
- 選択 その他 for common FAT32, exFAT, and NTFS file systems in PhotoRec’s file-system options.
- For a reformatted partition, choose the whole-partition scan when appropriate, rather than restricting the search to free space.
- Select the file types you need and choose a destination on another drive.
- Start recovery and review the saved output.
CGSecurity’s official PhotoRec tutorial explains these settings in more detail.
What Results Should You Expect?
Suppose a formatted USB stick previously held JPG photos, MP4 videos, and PDF documents.
PhotoRec may identify those files through their internal signatures, even when the original folders no longer exist.
However, it often assigns generated names such as f123456.jpg and saves results inside directories such as recup_dir.1.
期待される結果: You recover recognizable files, although their original names or folders may be missing.
制限: Fragmented files can remain incomplete, and sorting large quantities of recovered content may take considerable effort.
失敗した場合は: If the USB remains healthy, consider another recovery tool with file-system analysis and preview features. Don’t expect a second scanner to restore overwritten content.
Method 4: Recover Formatted USB Files with Magic Data Recovery
最高だ: Windows users who prefer guided scanning, file filtering, and previews instead of command-line recovery.
If no usable backup exists and Windows can reliably access the USB hardware, Magic Data Recovery offers a graphical alternative.
It supports logical recovery from formatted USB drives using common file systems, including FAT32, exFAT, and NTFS.
なぜMagic Data Recoveryを選ぶべきなのか?
The main difficulty after formatting isn’t always finding files. Sometimes it’s identifying which results are worth recovering.
For example, imagine a 32 GB USB containing PDF contracts, Excel spreadsheets, and travel photos.
PhotoRec may retrieve numerous files with generic names. Magic Data Recovery lets you browse discovered files, apply filters, and preview supported content before choosing what to restore.
Its relevant capabilities include:
- Formatted USB scanning: Searches for recoverable content after logical formatting-related data loss.
- ファイルのプレビュー: Helps identify potentially readable documents and photos.
- Search and filters: Narrows results by file type, name, or other available properties.
- Broad file support: Supports more than 5,000 file formats, according to Amagicsoft’s product documentation.
- Windows interface: Provides a guided workflow without recovery commands.
These features make file selection more convenient, but they don’t establish a higher recovery success rate than every free alternative.
How to Recover Formatted Data from Pen Drive with Magic Data Recovery
ステップ1:ダウンロードとインストール
Download Magic Data Recovery from the 公式製品ページ. Install it on your computer’s internal drive rather than the affected USB.
Windows 7/8/10/11およびWindows Serverをサポート
Step 2: Select the Formatted USB
Launch the software and locate the USB by its drive letter and capacity. Select the correct device or partition before starting the scan.

ステップ3:紛失したファイルのスキャン
Allow Magic Data Recovery to scan the USB for recoverable file-system information and file content. Keep the connection stable while the scan runs.

Step 4: Preview and Filter
Browse the scan results and use the available filters to locate relevant documents, photos, or videos. Preview supported files when possible. A preview that looks correct is useful evidence, but you should still verify the saved copy.

ステップ5:別のドライブに復元する
必要なファイルを選択して、クリックしてください 回復する. Choose your computer’s internal drive or another healthy storage device as the destination.

Finally, open the recovered files to check their integrity. For the detailed interface workflow, see the Magic Data Recoveryユーザーガイド.
Free Allowance and Recovery Limits
Magic Data Recovery currently allows up to 500 MB of free recovery. This can cover a small collection of documents or photos. Larger jobs may require a paid license.
Its limitations are the same fundamental boundaries that affect other software recovery tools:
- Overwritten content cannot be reconstructed.
- Physical USB hardware failures require different handling.
- Completed secure erasure or full overwriting can prevent recovery.
- A discovered filename doesn’t guarantee a usable file.
期待される結果: You identify, select, and save readable files to another drive.
失敗した場合は: Review whether the original content may have been overwritten. If the USB becomes unstable, stop scanning and seek specialist advice.
How to Verify Your Recovered USB Files
A recovery scan may report hundreds of discovered files, but found files are not necessarily usable files.
Before declaring recovery successful, inspect the copies saved on your destination drive.
ファイルの種類 | その確認方法 | Warning signs |
DOCX, PDF, XLSX | Open the document and inspect several pages or sheets | Errors, missing text, unreadable content |
JPG、PNG | View at full resolution | Gray areas, incomplete image, artifacts |
MP4, MOV | 冒頭、中盤、結末を再生する | Playback stops, missing footage |
ZIP, RAR | Test or extract the archive | CRC errors, failed extraction |
プロジェクトファイル | Open in the original application | Missing assets or corrupted structure |
Also, check file sizes. A zero-byte file or a suspiciously small recovered video deserves closer inspection.
For especially important documents, compare them with any available previous versions or backups.
If recovered files have generic names, use embedded metadata, recognizable content, and file extensions to identify them.
The recovery is only useful when the saved files contain the information you actually need.
Can CMD Unformat a USB Drive?
Some instructions recommend ATTRIB, CHKDSK, or DiskPart as solutions for フォーマット後のペンドライブ・データ復元.
However, these utilities don’t reverse a completed format.
- 属性 changes file attributes and can reveal files that are merely hidden. It cannot rebuild data removed by formatting.
- チェックディスク checks and repairs certain file-system errors. Its repair operations may modify metadata needed for later recovery.
- ディスクパート manages disks and partitions. Commands such as
クリーンそしてフォーマットcan make recovery more difficult.
There is no standard Windows command that restores a formatted USB to its exact previous state.
実際には, unformat USB drive usually refers to retrieving surviving files through backups or data recovery software.
Recover your important files before attempting to repair or reformat the device.
When Should You Stop DIY USB Recovery?
Software recovery is most appropriate when the device remains stable and exposes readable storage to Windows.
Stop repeated scanning and consider professional assistance if:
- The USB repeatedly disconnects during reading.
- Windows reports zero or an obviously incorrect capacity.
- The connector is damaged or the device overheats.
- Multiple computers cannot recognize the storage device.
- Read errors become more frequent.
- The files are irreplaceable, and you cannot afford further risk.
These symptoms may indicate controller, connector, or flash-memory problems that ordinary recovery software cannot repair.
For valuable data, a specialist may attempt to create a sector-by-sector image before deeper recovery work. However, imaging also requires reading the device and isn’t automatically safe for severely failing hardware.
How to Prevent USB Formatting Data Loss
Once your important files are recovered and verified, take a few precautions before reusing the USB.
- 別の場所にバックアップを保管しておいてください。. Don’t store the only copy of valuable files on a flash drive.
- Check the device before formatting. Verify its label, capacity, and contents.
- Use cloud version history or File History. These can preserve earlier copies of frequently edited documents.
- Replace unreliable USB drives. Repeated disconnections or capacity errors may indicate hardware deterioration.
If the USB works normally after recovery, you can prepare it for reuse. See our guide on USBドライブをFAT32でフォーマットする if you need compatibility with older devices.
However, don’t format or repair the original USB until you’ve verified that your recovered files are safely stored elsewhere.
Conclusion: Recover a Formatted USB Drive Safely
もしあなたが フォーマットされたUSBドライブを無料で復元する, your first priority should be protecting the existing data. A quick-formatted pen drive may still contain recoverable files, while full formatting, heavy reuse, or hardware damage can sharply reduce your options.
Start with backups. If no copy exists, Windows File Recovery provides a free Microsoft solution, and PhotoRec offers open-source file-signature scanning.
For Windows users who prefer a guided workflow, Magic Data Recovery is worth considering. Its file previews, filtering options, and 500 MB free recovery allowance can simplify smaller recovery tasks without requiring command-line experience.
Whichever option you choose, save recovered files elsewhere and verify them before reusing the USB. For additional recovery situations, visit Amagicsoft’s フォーマット済みドライブの復旧ガイド.
Windows 7/8/10/11およびWindows Serverをサポート
よくある質問
Recuvaは、フォーマットされたUSBメモリからファイルを復元できますか?
USBメモリを2回フォーマットした後でも、ファイルを復元することはできますか?
USBをWindowsのインストールメディアにした後でも、ファイルを復元することはできますか?
フォーマットされたUSBメモリのデータ復旧にはどれくらい時間がかかりますか?
お金を払わずに、フォーマットされたUSBのファイルを復元することはできますか?
MacでフォーマットされたUSBドライブのデータを復元することはできますか?
フォーマット済みのUSBメモリをスキャンすると、そのデータは変更されたり上書きされたりしますか?
Jasonは、15年以上の実務経験を持つデータ復旧およびテクニカルサポートの専門家です。 彼は第一線のユーザーと幅広く連携し、困難なデータ損失事例のトラブルシューティングを行うとともに、誤削除、ドライブのフォーマット、ファイルシステムの破損、パーティションの消失、システム障害、その他の緊急の復旧事態に対して、実用的な復旧ソリューションを提供してきました。また、バックアップと復元、ファイル修復、災害復旧にも精通しており、安全かつ信頼性が高く、技術的に正確な指導を特に重視しています。.
